In Shisen-Sho, finding two tiles with the same picture does not mean a line will connect them. A line can turn only twice, so you cannot use a roundabout path. This article shows a quick way to tell whether a pair can be removed. The rules are in Shisen-Sho Rules: Remove Pairs with Up to Two Turns.

How to Tell: Extend Straight Lines from Both Tiles

A line with up to two turns is made of these three parts.

  1. A straight line extending from the first tile.
  2. A straight line joining the two.
  3. A straight line going into the second tile.

So check in this order.

  1. From each of the two tiles, extend a line straight up, down, left, and right through open squares (until it hits a tile; it can reach the one-square border outside the board).
  2. See whether any point on the line from the first tile and any point on the line from the second tile can be joined by one straight line that passes only through open squares.

If they can be joined, the line has two turns or fewer, so you can remove the pair. If the extended lines meet directly, it is one turn (an L shape). If the two tiles are in the same row or column with nothing between them, it is zero turns (a straight line).

Examples That Connect

In the diagram below, there are four pairs you can remove.

一萬一筒一索一萬東南一筒一索西東南二萬二萬西
  • 1 of Characters (both ends of the top row): Both tiles can extend upward to the outside of the board. Join the outside lines sideways, and you get a U shape (2 turns).
  • East Wind (left column and right column): The left East Wind can extend two squares to the right, and the right East Wind can extend two squares to the left. Join the ends of those lines vertically, and you get a Z shape (2 turns).
  • West Wind (middle and bottom right): The line extended to the right from the upper West Wind meets the line extended upward from the lower West Wind, so it is an L shape (1 turn).
  • 2 of Characters (bottom row): They are next to each other, so it is a straight line (0 turns).

Examples That Do Not Connect

These three pairs on the same board do not connect.

一萬一筒一索一萬東南一筒一索西東南二萬二萬西
  • 1 of Circles: The right 1 of Circles is blocked by tiles above, below, and to the left, so it can extend only to the outside on the right. From there to the 1 of Circles at the upper left, the line would go around the outside with three turns.
  • 1 of Bamboo: There is no place where the line extended from the upper 1 of Bamboo and the line extended from the left 1 of Bamboo can be joined by one straight line.
  • South Wind: The South Wind at the lower left is blocked by tiles on the right and above, so it can go out only to the outside on the left and bottom. The South Wind at the upper right cannot go out to the outside, so connecting the two would take three or more turns.

Removing Tiles Opens Paths

A pair that does not connect can become removable once you remove tiles around it. If you remove the two 2 of Characters tiles on the board above, the South Wind at the lower left can extend to the right, and the two South Winds connect.

一萬一筒一索一萬東南一筒一索西東南西

If you think before you remove a pair, “Which pairs will connect after this?”, you are less likely to get stuck. For how to think about the order of removal, see Shisen-Sho Tips.